*************************************** Installing the Software ********************************* <> Make sure that the computer on which you plan to install the software meets the following requirements. OS: Windows 2000, XP CPU: Pentium 4, 1.7 GHz or higher Memory: At least 256 MB (512 MB recommended) HDD: 100 MB (1 GB recommended) additional space required for installing the application software Display:1024 * 768 pixels or higher 65535 colors or more (16-bit or more) Other: TCP/IP port CD-ROM drive (for installing from CD) USB 2.0 required for high-speed applications <> (1) Insert the GL500 User Guide CD-ROM provided into the PC CD-ROM drive. (2) Connecting the GL500 to the PC Connect the GL500 to the PC using the USB cable and turn on the power. (3) Installing the USB driver "New hardware has been connected" is displayed on the PC screen, and the install wizard appears. Continue, following the instructions on the screen. Select "\English\USB Driver" for the driver selection. <> (1) Insert the GL500 User Guide CD-ROM provided into the PC CD-ROM drive, and browse the CD-ROM contents. (2) Click the Taskbar's Start button, then click the Run....icon to open the 'Run' window. (3) Enter the CD-ROM drive name and "\English\GL500Application\SETUP.EXE" as the name of the file you wish to open. If the disk is in drive D, for example, enter "D:\English\GL500Application\SETUP.EXE" in the box to launch the installer. (4) Continue, following the instructions on the screen. GRAPHTEC CORPORATION GL500 Installation Guide GL500-UM-951